1. Used Automotive Fuel Pumps & Sending Units Offers
  2. sku: 6943524238855693
  3. AFPAPARTS20 AFP134731A20

AFPAPARTS20 AFP134731A20 Fuel Pump Aseembly Gas L4 1.5L

fits make: Mazda. year: 2011–2014.

Afp134731a20 Afpaparts20 Fuel Pump Aseembly For Mazda 2 2011 2012 2013 2014 L4 1.5l Gas

( Brand: Afpaparts20 ), ( Type: Fuel Pump ), ( Fuel Type: Gasoline ), ( Drive Type: Electrical ), ( Placement On Vehicle: Fuel Tank ), ( Items Included: Mounting Hardware ), ( Amperage: 10a ), ( Voltage: 12 V ), ( Outlet Outside Diameter: 5/16 ), ( Outlet Type: Quick Connect ), ( Fuel Level Sender Resistance: 10-326 Ohm ), ( Pressure: 55 Psi ), ( Terminal Gender: Male ), ( Universal Fitment: No ), ( In Tank Or External: In Tank ), ( Terminal Type: Blade ), ( Oe/oem Part Number: Fg1982 ), ( Manufacturer Part Number: AFP134731A20 ), ( Manufacturer Warranty: 1 Year )

Review AFPAPARTS20 Fuel Pump Aseembly Mazda L4 1.5l Gas fits 2011–2014

The AFPAParts20 fuel pump assembly, specifically the AFP134731A20 variant, is a crucial component for Mazda L4 engines with a displacement of 1.5L and a gas fuel type, manufactured for the models ranging from 2011 to 2014. This assembly is an essential part of the vehicle's fuel system, responsible for delivering fuel from the tank to the engine under high pressure.

The AFP134731A20 fuel pump assembly is meticulously engineered to ensure optimal performance and reliability. It consists of the fuel pump itself, which is mounted inside the fuel tank, and the related electrical components, such as the wiring harness and the relays. This assembly ensures a consistent fuel flow rate, enabling the engine to operate efficiently and effectively.

The fuel pump features a robust design, with a durable cast aluminum housing, ensuring resistance to corrosion and wear. The pump impeller is engineered for high efficiency, ensuring an adequate fuel supply to the engine even under heavy load conditions. The assembly also includes a fuel filter, which helps to remove impurities and debris from the fuel before it reaches the engine, ensuring clean combustion and extended engine life.

The electrical components of the assembly are designed to work in harmony with the fuel pump, ensuring a reliable and efficient power supply. The wiring harness is engineered to be resilient against damage, while the relays are designed to ensure a consistent power supply to the fuel pump, even when the engine is not running.

The AFPAParts20 fuel pump assembly is a direct replacement for the original equipment, ensuring a perfect fit and easy installation. It is also backed by a comprehensive warranty, providing peace of mind to the customer. With its robust design, proven performance, and ease of installation, the AFP134731A20 fuel pump assembly is an essential upgrade for any Mazda L4 engine with a 1.5L gas fuel type, manufactured between 2011 and 2014.

Pros and Cons of Buying AFPAParts20 Fuel Pump Assembly for Mazda 2011-2014 L4 1.5L Gas

1. Pros:

a. OEM (Original Equipment Manufacturer) Quality: AFPAParts20 is known for manufacturing high-quality aftermarket parts that are designed to meet or even exceed the original equipment specifications.

b. Cost-Effective: Compared to buying a new car or even a remanufactured fuel pump assembly from a dealership, an aftermarket fuel pump assembly like AFPAParts20 can save you a significant amount of money.

c. Easy Installation: The fuel pump assembly is a relatively simple component to replace, and most mechanics or even DIY enthusiasts can do the job in a few hours.

d. Availability: AFPAParts20 fuel pump assemblies are widely available from various automotive parts stores and online retailers, making it convenient for customers to purchase and have it delivered to their doorstep.

2. Cons:

a. Potential for Counterfeit Parts: While AFPAParts20 is a reputable brand, there is always a risk of purchasing counterfeit or low-quality aftermarket parts from unscrupulous sellers. Make sure to buy from a trusted supplier or retailer.

b. Warranty: Aftermarket parts like AFPAParts20 fuel pump assemblies may not come with the same lengthy warranties as OEM parts. However, AFPAParts20 does offer a warranty on their products.

c. Potential for Compatibility Issues: Although AFPAParts20 fuel pump assemblies are designed to fit various Mazda models, there is still a possibility of compatibility issues. Double-check that the part number matches your specific vehicle.

Ending Conclusion:

Buying an AFPAParts20 fuel pump assembly for your Mazda 2011-2014 L4 1.5L gas engine comes with both advantages and disadvantages. While it offers cost savings, ease of installation, and OEM quality, there are also potential risks such as counterfeit parts, compatibility issues, and shorter warranties. However, with proper research and due diligence, purchasing an aftermarket fuel pump assembly from a reputable supplier like AFPAParts20 can be a wise and cost-effective choice.

Recommendation:

To ensure a successful purchase, make sure to buy the fuel pump assembly from a trusted and reputable supplier with a good track record. Check customer reviews and ratings, and verify that the part number matches your specific Mazda model. Additionally, consider the benefits and potential risks before making a decision. If you're unsure, consult a professional mechanic for advice.

Details:

If the fuse blows again, a direct short is present and will need to be diagnosed. If no power is making it to the fuel pump, then check pump relay circuit. Keep a fire extinguisher nearby while working on or testing the fuel system. It should be guaranteed at least three months.

1.Check the fuel pump fuse. 4.Have a helper rev the engine while you check gauge. Blow through the filter inlet, paying attention to resistance, which should be minimal. Try to avoid extended idling whenever possible.

1.Eliminate the filter as a possibility. Use a short piece of rubber hose on the filter inlet. Often, its not the pump itself that fails to function, but power supplies it. Locate your fuel pump test point, which is usually near the injectors, and locate point at hooks up with filter injector rail.

2.Check the voltage at pump itself. If your fuel pump does needs replacing, a rebuilt one is often as good new one, and lot less expensive. This can water down the gasoline and cause corrosion. If the filter gets clogged with sediment, you can have trouble accelerating and might suspect your fuel pump has got a problem.

Just because you're getting juice from the circuit doesn't mean that its to pump itself, which makes it important check voltage there as well. Item Specifics: Type: Fuel Pump, Fuel: Gasoline, Drive: Electrical, Placement on Vehicle Tank, Items Included: Mounting Hardware, Amperage: 10A, voltage : 12 V, Outlet Outside Diameter: 5/16, Quantity: 1,: Quick Connect, Level Sender Resistance: 10-326 ohm, Pressure: 55 psi, Terminal Gender: Male, Universal Fitment: No, Vintage Car Part Performance In Tank or External: In: Blade,: 4, OE/OEM Number: FG1982, Manufacturer: AFP134731A20, Brand: AFPAPARTS20, Warranty: 1 Year. Let the engine warm up slightly, then check pressure both at idle speed and rated listed in your pump specifications. Pull it out and inspect for signs of failure.

The test only takes a few minutes. A bad fuel pump can lead to engine performance issues and even cause your vehicle break down. Keep your fuel tank full: Keeping full can help prevent condensation from forming inside. If you re feeling adventurous, some manufacturers supply rebuild kits.

Use good-quality gasoline: Using low-quality gasoline can shorten the life of your fuel pump. Be sure to use a good quality gasoline that has the correct octane rating for your vehicle. To check it, remove the filter from vehicle and drain excessive fuel. There should be a separation joint or test port, where the pressure gauge attaches.

Regularly maintain your vehicle: This includes things like changing the oil and air filter, as well making sure engine is tuned up. There are several things you can do to help prevent your fuel pump from going bad. If you don't know the rated speed, just rev engine and see how pressure reacts. If it looks good, check the rest of fuses related to fuel system for signs being blown and replace them, if necessary.

Use a fuel stabilizer: Adding stabilizer to your gas can help prevent it from going bad. If no fuses are blown, have a helper turn the key while you listen for fuel pump relay ing on. Fuel stabilizers keep the gasoline fresh and help prevent corrosion. Inspect the screen for debris and replace filter if necessary by blowing through outlet side of into a white rag or towel.

New List Item. Avoid extended idling: Extended idling can overheat the fuel pump and shorten its life. Check to make sure that the power wire shows full voltage and grounding its grounded properly. Perform a drop test using voltmeter.

Test for source voltage , to determine whether or not the good charge that's leaving fuse is getting pump. Proper precautions should be taken for safe testing and diagnosis. The pressure should match the specifications listed in repair manual, and increase as you rev engine. If you notice any issues with engine performance, it is important to take your vehicle a mechanic as soon possible have diagnosed and repaired.

3.Hook the pressure gauge to fuel pump test fitting. Method 2 Performing a Fuel Pressure Test. Method 1 Performing an Electrical Test. 2.Get a fuel pressure gauge.

Avoid running your vehicle low on fuel: This can cause the fuel pump to overwork and wear out prematurely. You can take your pump apart with a screwdriver and rebuilt it yourself, following directions on the kit.

specifications pumpunite:

  • for makes: Mazda
  • for years: 2011-2014
  • brand: Afpaparts20
  • type: Fuel Pump
  • fuel type: Gasoline
  • drive type: Electrical
  • placement on vehicle: Fuel Tank
  • items included: Mounting Hardware
  • amperage: 10a
  • voltage: 12 V
  • outlet outside diameter: 5/16
  • outlet type: Quick Connect
  • fuel level sender resistance: 10-326 Ohm
  • pressure: 55 Psi
  • terminal gender: Male
  • universal fitment: No
  • in tank or external: In Tank
  • terminal type: Blade
  • oe/oem part number: Fg1982
  • manufacturer part number: AFP134731A20
  • manufacturer warranty: 1 Year

shipping pumpunite:

  • transit: 4-8 Days
  • carrier: FedEx
  • class: Economy
  • service: FedEx Ground Economy
  • type: Fixed
  • cost: $0.00

offer pumpunite:

  • best offers: True
  • started: May 1, 2025
  • availability: In Stock
  • options: Ship-to-home
  • sold: 0
  • quantity: 10

returns pumpunite:

  • policy: Returns Accepted
  • time: 30 Days
  • paid by: Seller

general pumpunite:

  • Car Truck Parts Accessories > Air Fuel Delivery > Fuel Pumps Sending Units
  • condition: New

seller pumpunite:

  • city: Ontario, California
  • # reviews: 2339
  • rating: 99.1%

payments pumpunite:

  • wallet: Paypal
  • other
  • credit card: Diners-club
for makes: mazda, for years: 2011-2014, type: fuel pump, fuel type: gasoline, drive type: electrical, placement on vehicle: fuel tank, items included: mounting hardware, amperage: 10a, voltage: 12 v, outlet outside diameter: 5/16, outlet type: quick connect, fuel level sender resistance: 10-326 ohm, pressure: 55 psi, terminal gender: male, universal fitment: no, in tank or external: in tank, terminal type: blade, oe/oem part number: fg1982, manufacturer warranty: 1 year,
category: auto parts > car truck parts accessories > air fuel delivery > fuel pumps sending units, sku: 6943524238855693,

Afpaparts20 AFP134731A20 Is Similar To:

Copyright © pumpunite.com