AFPAPARTS2 AF116209D01 Fuel Pump Module L6-4.9L V8-7.5L

( Brand: Afpaparts2 ), ( Part Type: Fuel Pump Module ), ( Manufacturer Part Number: AF116209D01 ), ( Drive Type: Electrical ), ( Fuel Type: Gas ), ( Fitment Type: Direct Replacement ), ( Manufacturer Warranty: 1 Year ), ( Mounting Hardware Included: No ), ( Oe/oem Part Number: E2103s67034, P74518s, Hp10149, Sp223h ), ( Gasket Included: Yes ), ( Pressure: 30-40 ), ( Flow Rate: 50-70 ), ( Voltage: 12 V ), ( Internal Or External: Internal ), ( Universal Or Specific Fit: Specific ), ( Outlet Size: 3/8 )

Review AFPAPARTS2 Fuel Pump Module Ford L6-4.9l V8-7.5l fits F-150 F-250 F-350 1987–1989

Introducing the AFPAParts2 Fuel Pump Module (Part Number: AF116209D01) - an essential component for maintaining the optimal fuel delivery system in Ford F-150, F-250, and F-350 trucks equipped with the L6-4.9L V8 and 7.5L V8 engines for the model years 1987, 1988, and 1989.

This fuel pump module is a critical part of your vehicle's fuel delivery system. Its primary function is to regulate the flow of fuel from the fuel tank to the engine. When you turn the key in the ignition, the fuel pump module sends an electrical signal to the fuel pump, allowing it to prime the engine with fuel, ensuring a smooth start-up.

Manufactured with top-tier materials and precision engineering, this fuel pump module guarantees reliability and longevity. Its robust design can withstand the rigors of daily driving, making it an excellent choice for Ford truck owners seeking a dependable and long-lasting solution.

The AF116209D01 fuel pump module is a direct-fit replacement, ensuring a seamless installation process. It comes with all necessary hardware, allowing you to replace your old fuel pump module with minimal effort and without requiring any modifications to your vehicle.

By choosing the AFPAParts2 AF116209D01 Fuel Pump Module, you'll not only restore the performance of your Ford F-Series truck but also protect yourself from the potential risks and costs associated with a faulty fuel pump module. This upgrade will provide you with peace of mind, allowing you to enjoy your vehicle with confidence and reliability.

In summary, the AFPAParts2 AF116209D01 Fuel Pump Module is a high-quality, direct-fit replacement designed specifically for Ford F-150, F-250, and F-350 trucks with L6-4.9L V8 and 7.5L V8 engines from the model years 1987, 1988, and 1989. Its robust design, easy installation process, and reliability make it an excellent choice for those seeking optimal fuel delivery system performance and long-lasting durability.

The AFPAParts2 Fuel Pump Module (Part Number: AF116209D01) is a replacement option for Ford F-150, F-250, and F-350 vehicles with the L6-4.9L V8 and 7.5L engines produced in 1989, 1988, and 1987. This component is essential for delivering fuel to the engine, and its failure may result in various vehicle issues, such as poor engine performance or no start condition. In this context, let's discuss some pros and cons of purchasing this fuel pump module.

1. OEM compatibility: This part is specifically designed to fit and function like the original equipment manufacturer (OEM) fuel pump module for the selected Ford models.

2. Improved performance: A new fuel pump module can help enhance the overall performance of the vehicle by ensuring an adequate fuel supply to the engine.

3. Reliability: A replacement fuel pump module is expected to last longer than a failing or worn-out original component, offering peace of mind and reducing the likelihood of future fuel delivery issues.

4. Cost-effective: In some cases, replacing the fuel pump module can be more cost-effective than other repair options, especially when considering the potential labor costs associated with diagnosing and repairing other fuel system components.

1. Upfront cost: While the fuel pump module may be a cost-effective repair solution in the long run, the upfront cost can be substantial, especially when compared to some routine maintenance procedures.

2. Installation complexity: Installing a new fuel pump module can be a challenging task, especially for those without automotive repair experience. This may require hiring a professional mechanic, which can add to the overall cost.

3. Potential for additional repairs: In some cases, a failing fuel pump module may be a symptom of a larger fuel system issue. Replacing the fuel pump module alone may not resolve the underlying problem, potentially leading to additional repair expenses.

The AFPAParts2 Fuel Pump Module (AF116209D01) is a valuable replacement option for Ford F-150, F-250, and F-350 vehicles with the L6-4.9L V8 and 7.5L engines from 1989, 1988, and 1987. Its OEM compatibility, improved performance, reliability, and cost-effectiveness make it an attractive choice for vehicle owners experiencing fuel delivery issues. However, the upfront cost and installation complexity are valid concerns that should be carefully considered before making a purchase. Ultimately, the decision to buy this fuel pump module depends on the individual's vehicle repair needs, budget, and expertise.

For those who are confident in their automotive repair skills, the AFPAParts2 Fuel Pump Module (AF116209D01) can be a cost-effective and reliable solution for addressing fuel delivery issues in their Ford F-150, F-250, or F-350. For those who lack the necessary experience or resources, it is recommended to consult a professional mechanic for an accurate diagnosis and repair recommendation. Additionally, considering the potential for additional repairs, it is essential to have a clear understanding of the vehicle's overall fuel system health before making a decision.

Details:

Locate your fuel pump test point, which is usually near the injectors, and locate point at hooks up with filter injector rail. Test for source voltage , to determine whether or not the good charge that's leaving fuse is getting pump. If you notice any issues with engine performance, it is important to take your vehicle a mechanic as soon possible have diagnosed and repaired. Try to avoid extended idling whenever possible.

To check it, remove the filter from vehicle and drain excessive fuel. Often, its not the pump itself that fails to function, but power supplies it. Blow through the filter inlet, paying attention to resistance, which should be minimal. If it looks good, check the rest of fuses related to fuel system for signs being blown and replace them, if necessary.

Pull it out and inspect for signs of failure. 2.Get a fuel pressure gauge. If no fuses are blown, have a helper turn the key while you listen for fuel pump relay ing on. Method 2 Performing a Fuel Pressure Test.

3.Hook the pressure gauge to fuel pump test fitting. Use a short piece of rubber hose on the filter inlet. 4.Have a helper rev the engine while you check gauge. 1.Check the fuel pump fuse.

Inspect the screen for debris and replace filter if necessary by blowing through outlet side of into a white rag or towel. Fuel stabilizers keep the gasoline fresh and help prevent corrosion. If the filter gets clogged with sediment, you can have trouble accelerating and might suspect your fuel pump has got a problem. A bad fuel pump can lead to engine performance issues and even cause your vehicle break down.

2.Check the voltage at pump itself. Avoid running your vehicle low on fuel: This can cause the fuel pump to overwork and wear out prematurely. If your fuel pump does needs replacing, a rebuilt one is often as good new one, and lot less expensive. Check to make sure that the power wire shows full voltage and grounding its grounded properly.

The pressure should match the specifications listed in repair manual, and increase as you rev engine. Be sure to use a good quality gasoline that has the correct octane rating for your vehicle. Proper precautions should be taken for safe testing and diagnosis. If no power is making it to the fuel pump, then check pump relay circuit.

Use good-quality gasoline: Using low-quality gasoline can shorten the life of your fuel pump. If you re feeling adventurous, some manufacturers supply rebuild kits. Let the engine warm up slightly, then check pressure both at idle speed and rated listed in your pump specifications. Just because you're getting juice from the circuit doesn't mean that its to pump itself, which makes it important check voltage there as well.

Regularly maintain your vehicle: This includes things like changing the oil and air filter, as well making sure engine is tuned up. If you don't know the rated speed, just rev engine and see how pressure reacts. Method 1 Performing an Electrical Test. Item Specifics: Brand: AFPAPARTS2, Manufacturer Part Number: AF116209D01, Drive Type: Electrical, Fuel: Gas, Fitment: Direct Replacement, Warranty: 1 Year, Mounting Hardware Included: No, OE/OEM: E2103S67034,P74518S,HP10149,SP223H, Custom Bundle Gasket: YES, PSI: 30-40, Gallons Per Hour GPH : 50-70, Modified voltage : 12 V, Internal Or External: Internal, Universal Specific Fit: Specific, Quantity Application: 1, Wiring Harness Outlet Size: 3/8, Terminal Quantity: 4, Inlet Count.

If the fuse blows again, a direct short is present and will need to be diagnosed. 1.Eliminate the filter as a possibility. Avoid extended idling: Extended idling can overheat the fuel pump and shorten its life. This can water down the gasoline and cause corrosion.

Keep your fuel tank full: Keeping full can help prevent condensation from forming inside. Keep a fire extinguisher nearby while working on or testing the fuel system. Use a fuel stabilizer: Adding stabilizer to your gas can help prevent it from going bad. You can take your pump apart with a screwdriver and rebuilt it yourself, following directions on the kit.

There should be a separation joint or test port, where the pressure gauge attaches. Perform a drop test using voltmeter. There are several things you can do to help prevent your fuel pump from going bad. The test only takes a few minutes.

It should be guaranteed at least three months. New List Item.

specifications pumpunite:

• for models: F-150, F-250, F-350
• for makes: Ford
• for years: 1987-1989
• brand: Afpaparts2
• part type: Fuel Pump Module
• manufacturer part number: AF116209D01
• drive type: Electrical
• fuel type: Gas
• fitment type: Direct Replacement
• manufacturer warranty: 1 Year
• mounting hardware included: No
• oe/oem part number: E2103s67034, P74518s, Hp10149, Sp223h
• gasket included: Yes
• pressure: 30-40
• flow rate: 50-70
• voltage: 12 V
• internal or external: Internal
• universal or specific fit: Specific
• outlet size: 3/8

seller pumpunite:

• city: Ontario, California
• # reviews: 2800
• rating: 99.5%

returns pumpunite:

• paid by: Seller
• policy: Returns Accepted
• time: 30 Days

payments pumpunite:

• other
• wallet: Paypal
• credit card: Diners-club

shipping pumpunite:

• service: FedEx Ground Economy
• cost: $0.00
• class: Economy
• transit: 5-9 Days
• type: Fixed
• carrier: FedEx

general pumpunite:

• Car Truck Parts Accessories > Air Fuel Delivery > Fuel Pumps Sending Units
• condition: New

offer pumpunite:

• best offers: True
• started: February 12, 2026
• options: Ship-to-home
• sold: 0
• quantity: 1
• availability: In Stock

Afpaparts2 AF116209D01 Is Similar To:

• Afpaparts2 Af116245d01 Fuel Pump Module For Jeep Commander V8 4.7l 2007 2008 2009 2010 (57.9% similar) Let the engine warm up slightly, then check pressure both at idle speed and rated listed in your pump specifications. Use a fuel stabilizer: adding stabilizer to your gas can help prevent it from going bad. If you don't know the rated speed, just rev engine and see how pressure reacts...(January 23rd, 2025)
• Afpaparts2 Af170161r01 For 2006 2007 2008 Honda Fit L4 1.5l E8714m Fuel Pump Module Assembly (37% similar) Often, its not the pump itself that fails to function, but power supplies it. To check it, remove the filter from vehicle and drain excessive fuel. Pull it out and inspect for signs of failure. 1.ELIMINATE the filter as a possibility. There are several things you can do to help prevent...(February 10th, 2025)
• Afpaparts2 Af116235d01 Fuel Pump Module For Ford F-250 F-150 L6 4.9l 1990 1991 Sp33a1h (78.7% similar) 1.ELIMINATE the filter as a possibility. 3.HOOK the pressure gauge to fuel pump test fitting. Blow through the filter inlet, paying attention to resistance, which should be minimal. 2.GET a fuel pressure gauge. If your fuel pump does needs replacing, a rebuilt one is often as good new...(June 30th, 2025)