FACTORY AUTOMOTIVE DISTRIBUTORS DYH135828OEOEMORIGINALPART E16096 FWD/4WD Sport Es 2.0L L4 Fuel Pump

( Brand: Factory Automotive Distributors ), ( Buyer Attention: Hello, Please Use The Tool At The Top Of The Page Enter Year, Make, Model, Trim, Engine Size To Verify Was Approved By, And Must View The Notes Beside The Vehicle You Have Selected, It Is The Buyers Responsibility To Verify. ), ( Manufacturer Warranty: Lifetime ), ( Grade Type: Premium ), ( Oe/oem Spec Or Performance/custom: Oe/oem Spec ), ( Fitment Type: Direct Replacement To The Original One ), ( Placement On Vehicle: Inside The Automotive Fuel Tank ), ( Assembly Type: Composite, Sealed ), ( Drive Type: Electrical ), ( Fuel Type: Gasoline ), ( Items Included: Mounting Hardware Same As The Picture, Fuel Filter/strainer Mounted Internally ), ( Country/region Of Manufacture: Taiwan ), ( Item Weights: 1.43 Kg / 3.15 Lb ), ( Automotive Part Styles/designs: Factory-style/design, Oe/oem-style/design ), ( Type: Fuel Pump ), ( Automotive Part Type: Automotive Electrical Fuel Pump Module Assembly, Automotive Electrical Fuel Pump Assembly, Automotive Electrical Fuel Pump And Sending Unit Module Assembly, Automotive Electrical Fuel Pump And Sender Module Assembly, Automotive Electrical Fuel Pump And Level Unit Module Assembly ), ( Features: Factory-automotive Electrical Fuel Pump Module Assembly, Composite Assembly, Sealed Assembly, Factory-certified, Oe-certified, Oem-certified, Dot-certified, Fmvss-certified, Nhtsa-certified, Epa-certified, Voc-certified, Sae-certified, Astm-certified, Iso-certified, Iatf-certified, Ts-certified, Ul/etl-certified, Fcc-certified, Carb-certified, Cec-certified, Doe-certified, Sgs-certified, Qs9000-certified ), ( Oe/oem Part Number: E16096, E9016m, Cfg2169, Fg2169, Sp4130m, 1760a353 ), ( Automotive Electrical Fuel Pump Module Assembly Components: 2 Electrical Connector Included, Fuel Inlet Port Fuel Outlet Port Included, Plastic Top Cover/flange Included, Abrasion Sleeve Included, Metal Guide Rod Guide Rod Spring Included, Corrugated Pipe Included, Silver Alloy Button Included, Over-molded Armature Included, Carbon Commutator Included, Electric Motor Included, Electrical Turbine Fuel Pump Included, Electrical Turbine Fuel Pump Body Included, Electrical Turbine Fuel Pump Mechanism Included, Plastic Reservoir Assembly Plastic Housing Assembly Included, Rubber Feet Included, Fuel Sending Unit Included, Fuel Float Arm Included, Fuel Tank Pressure Sensor Included, Fuel Pressure Regulator Same As The Picture, Fuel Filter/fuel Strainer Mounted Internally, Metal Clamp Same As The Picture, Gasket/o-seal Ring Same As The Picture, Lock Ring Same As The Picture, Fuel Tank Seal Ring Same As The Picture, Mounting Hardware Wire Harness Same As The Picture ), ( Inlet Type Quantity: Strainer/filter 1 ), ( Outlet Quantity Shape Type: 1 Round Quick Connect ), ( Connector Quantity Shape Type: 2 Trapezoid Rectangle 5pin 3pin ), ( Terminal Quantity Shape Type: 2 Trapezoid Rectangle 5blade 3blade, Other Components Same As The Picture ), ( Automotive Electrical Fuel Pump Module Assembly Working Principle: It Mainly Relies On The Electric Motor To Drive The Vane Rotation, And Relies On The Centrifugal Force, The Fuel Will Be Sucked In From The Inlet Hole, And Discharged From The Outlet Hole. ), ( Automotive Electrical Fuel Pump Module Assembly Function: The Fuel Is Pumped Out From The Fuel Tank, And Delivered To The Injector Nozzle Through The Fuel Supply Line, At A Certain Pressure To Provide Quantitative Fuel, For Each Cylinder. ), ( Automotive Electrical Fuel Pump Module Assembly Roles: The Heart Of A Vehicles Fuel Delivery System, To Supply Clean Pressurized Fuel To The Fuel Injector, Provide Fuel Level Reading To The Vehicle Dashboard, Close The Fuel Nozzle When Refueling, Control Supply Of Fuel Through Electrical Signals, Pump Fuel From The Fuel Tank, Feed The Fuel Into The Engine Combustion Chamber, Provide Stable Fuel Flow And Pressure, Ensure Smooth Engine Operation, Increase The Pressure Of Fuel, Ensure Sufficient Fuel Supply To The Engine Combustion Chamber, Send The Pressurized Fuel Into The High-pressure Fuel System, Screen Out Impurities And Pollutants In The Fuel, Prevent Impurities And Pollutants From Entering The Engine, Help Protect Normal Operation Of The Engine, Help Prolong The Service Life Of The Fuel System, Control The Fuel Pressure, Ensure Stable Fuel Supply, Adjust The Fuel Pressure By Responding To Change In Engine Load, Meet The Need In Different Working Condition, Monitor Operation Status Of The Fuel System, Control And Adjust Fuel Supply, Maintain Normal Operation Of The Fuel System ), ( Automotive Fuel Delivery System Components: Fuel Tank, Automotive Electrical Fuel Pump Module Assembly, Fuel Filter, Fuel Lines, Fuel Rail, Fuel Hoses, Fuel Pressure Regulator, Fuel Injectors, Carburetors, Intake Valve, Piston, Combustion Chamber, Fuel Gauge/indicator, Engine, Other Components ), ( Automotive Electrical Fuel Pump Module Assembly Color: Same As The Picture ), ( Automotive Electrical Fuel Pump Module Assembly Certifications: Factory-approved, Oe-approved, Oem-approved, Dot-approved, Fmvss-approved, Nhtsa-approved, Epa-approved, Voc-approved, Sae-approved, Astm-approved, Iso-approved, Iatf-approved, Ts-approved, Ul/etl-approved, Fcc-approved, Carb-approved, Cec-approved, Doe-approved, Sgs-approved, Qs9000-approved ), ( Automotive Electrical Fuel Pump Module Assembly Materials: High-strength Synthetic Metal, High-strength Synthetic Plastic, High-strength Synthetic Rubber ), ( 7 Sign To Go For Replacement Automotive Part: No Start, Hard Start, Rough Idle, Hesitation, Lack Of Power, Engine Misfire, Intermittent Engine Performance ), ( Package Included: 1xautomotive Electrical Fuel Pump Module Assembly, Automotive Electrical Fuel Pump Assembly, Automotive Electrical Fuel Pump And Sending Unit Module Assembly, Automotive Electrical Fuel Pump And Sender Module Assembly, Automotive Electrical Fuel Pump And Level Unit Module Assembly ), ( Quantity Sold: 1 Item Per Lot/1 Piece Per Lot/1 Product Per Lot ), ( Compatible Year: 2010, 2011, 2012, 2013 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 ), ( Compatible Model: Outlander, Outlander Sport ), ( Compatible Engine: 2.0l 1998cc 122cu. In. L4 Gas Dohc Naturally Aspirated, 2.4l 2360cc 144cu. In. L4 Gas Dohc Naturally Aspirated ), ( Vehicle Service Type: Sport Utility 4-door ), ( Voltage: 12 V ), ( Amperage: The Same Amperage As The Original ), ( Minimum-maximum Flow Rate Gph Or L/h : The Same Flow Rate As The Original ), ( Minimum-maximum Pressure Psi Or Bar : The Same Pressure As The Original ), ( Mounting Style: Bolt-on, Screw-in, Screw-on ), ( Universal Fitment: Yes ), ( Manufacturer Part Number: DYH135828OEOEMORIGINALPART )

Review FACTORY AUTOMOTIVE DISTRIBUTORS Fwd/4wd Mitsubishi Sport Es 2.0l L4 Fuel Pump Assembly fits OUTLANDER FWD 4WD 2011–2013

Introducing the DYH135828 OEM Original Fuel Pump for the Mitsubishi Outlander Sport ES 2.0L L4 models from 2011 to 2013. This fuel pump is an exact replacement part for your vehicle, ensuring a perfect fit and reliable performance.

The DYH135828 fuel pump is engineered to deliver fuel efficiently and consistently to your engine. It features a high-quality electric motor that draws power from your vehicle's electrical system to pressurize the fuel and deliver it to the engine. The pump's design includes a durable housing made from reinforced materials, which protects it from the harsh conditions of your engine bay and extends its lifespan.

One of the key benefits of this OEM Original fuel pump is its compatibility with your vehicle's fuel system. It is specifically designed to work with the fuel system components in your Mitsubishi Outlander Sport ES, ensuring optimal fuel flow and pressure. This can lead to improved engine performance, better fuel economy, and a smoother driving experience.

Installation of the DYH135828 fuel pump is a straightforward process. It comes with all necessary hardware and connections to make the replacement simple and hassle-free. The pump's connections are color-coded for easy identification and installation, and it is designed to be a direct replacement for the original part.

When it comes to quality and reliability, the DYH135828 OEM Original Fuel Pump for the Mitsubishi Outlander Sport ES is the clear choice. It is manufactured to meet or exceed the original equipment specifications, providing you with the confidence and peace of mind that comes with using a genuine replacement part.

In summary, the DYH135828 OEM Original Fuel Pump for the Mitsubishi Outlander Sport ES 2.0L L4 models from 2011 to 2013 is a high-quality, reliable replacement part that ensures optimal fuel flow and pressure in your vehicle. It is engineered to fit perfectly and is a simple, straightforward installation process. Trust this OEM Original part to improve your engine performance, enhance fuel economy, and provide you with a smoother driving experience.

Buying OEM (original equipment manufacturer) fuel pumps, such as the Mitsubishi part number dyh135828 for the FWD/4WD Mitsubishi Outlander Sport ES 2.0L L4 2011-2013, has its advantages and disadvantages.

1. Guaranteed Fit: OEM fuel pumps are designed to fit your specific vehicle model and year. This ensures a proper installation and eliminates potential issues caused by compatibility problems.

2. Manufacturer Warranty: OEM parts come with a manufacturer's warranty, which can provide peace of mind and protect you against potential defects or failures.

3. Quality and Reliability: OEM fuel pumps are built to meet the manufacturer's standards, ensuring high-quality and reliable performance.

1. Cost: OEM fuel pumps can be more expensive than aftermarket or used parts. This can be a significant disadvantage for those on a tight budget.

2. Availability: OEM fuel pumps may not always be readily available, especially for older models or less common vehicle configurations. This can result in longer wait times for repairs or replacements.

When considering the purchase of an OEM fuel pump for your Mitsubishi Outlander Sport ES 2.0L L4 2011-2013, it's essential to weigh the advantages and disadvantages carefully. If you prioritize a guaranteed fit, manufacturer warranty, and high-quality and reliable performance, then an OEM fuel pump is the best choice. However, if cost or availability is a concern, you may want to explore aftermarket or used options.

If you have the budget and prefer the peace of mind that comes with an OEM fuel pump, go ahead and purchase the Mitsubishi dyh135828. If cost is a concern, consider researching reputable aftermarket fuel pump manufacturers or looking for a used fuel pump from a trusted source. Always prioritize the safety and reliability of your vehicle when making parts purchasing decisions.

Details:

This could mean the Automotive electrical fuel pump module assembly is struggling to keep up with increased need for gasoline. Same As The Picture, Country/Region of Manufacture. Amperage: The Same Amperage As Original. We explore the three most common causes of Automotive electrical fuel pump module assembly failures.

Siphon or drain as much fuel possible from the tank. Automotive Part Type: Electrical Fuel Pump Module Assembly, And Sender Level Unit Assembly. Note-1: For 2010 Mitsubishi Outlander only fits the ES or SE model. Find and verify the Automotive electrical fuel pump module assembly fuse relay.

The Automotive electrical fuel module pump assembly is found within the tank and submerged in during normal operation. The Automotive electrical fuel pump module assembly will hum for two to three seconds, if working properly. How To Replace A Automotive Electrical Fuel Pump Module Assembly. Gasoline, Drive Type.

Electrical issues: faults are also significant contributors to Automotive electrical fuel pump module assembly failures. Reconnect the filler tube hose and electrical connector. Hesitation during acceleration: The vehicles acceleration is slower than normal or the engine shuts down completely. 3.Item Specifics.

Check Automotive electrical fuel pump module assembly operation. Minimum-Maximum Flow Rate gph or l/h: The Same Rate As Original. Automotive Electrical Fuel Pump Module Assembly Mounting Style: Bolt-On, Screw-In, Screw-On. For FWD/4WD Mitsubishi Outlander Sport ES 2.0L l4 2011 - 2013 Fuel Pump Assembly.

Find the Automotive electrical fuel pump module assembly, which on most vehicles is in tank. Production Environment. Package Type: Box. Note-2: For 2010 Mitsubishi Outlander only fits the model with FWD Front-Wheel Drive, not fit AWD All-Wheel Drive.

Remove any retaining straps or bolts holding the tank to frame. Support the fuel tank with a jack and block of wood. Automotive Fuel System Components: Tank, Electrical Pump Module Assembly, Filter, Lines, Rail, Hoses, Pressure Regulator, Injectors, Carburetors, Intake Valve, Piston, Combustion Chamber, Gauge/Indicator, Engine, Other Components. Raw Material-Central Feeding System.

Rough idle: A clogged Automotive electrical fuel pump module assembly prevents the proper amount of gasoline from getting to engine, which ultimately affects idle speed. 2.Vehicle Fitments. AI Robot Work group. Automotive Electrical Fuel Pump Module Assembly Materials: High-Strength Synthetic Metal, Plastic, Rubber.

Automotive electrical fuel pump module assembly are primarily comprised of plastic reservoir and either a or steel top cover flange. Verifying Proper Fitment For Your Vehicle. Taiwan, Manufacturer Warranty. Install the new Automotive electrical fuel pump module assembly.

Lift the fuel tank up and install retaining strap. The Same Amperage As Original, Flow Rate gph or l/h. Inside The Automotive Fuel Tank, Type. Removing the fuel tank or back seat may be necessary.

Relieve the fuel system pressure. A failing Automotive electrical fuel pump module assembly delivers far less to the engine, and while this is a significant vehicle setback there are ways anticipate problem. Full-Automatic Armature Line. Disconnect the fuel lines and remove Automotive electrical pump module assembly from tank.

The Same Flow Rate As Original, Pressure psi or bar Pressure Fuel Level Sender Resistance ohms Resistance Color. In addition to this, it provides the fuel level reading vehicles instrument cluster, shuts off nozzle when refueling, among many other critical functions. Lower the tank. If your Automotive electrical fuel pump module assembly is not delivering enough pressure to meet specifications or pumping keep up with the engine, it may need be replaced.

Turbine, voltage . The Automotive electrical fuel pump module assembly is the heart of a vehicles delivery system. Keep the fuel pump work reliable for a long time in tank under low level. If the fuse and relay are functional, check for power ground at Automotive electrical fuel pump module assembly.

Proactively prevent issues by understanding these three main signs of Automotive electrical fuel pump module assembly failures. Automotive Electrical Fuel Pump Module Assembly Working Principle And Function Role. Automotive Electrical Fuel Pump Module Assembly Roles: The Heart Of A Vehicles Delivery System To Supply Clean Pressurized Injector Provide Level Reading Vehicle Dashboard Close Nozzle When Refueling Control Through Signals From Tank Feed Into Engine Combustion Chamber Stable Flow And Pressure Ensure Smooth Operation Increase Sufficient Send High-Pressure Screen Out Impurities Pollutants In Prevent Entering Help Protect Normal Prolong Service Life Adjust By Responding Change Load Meet Need Different Working Condition Monitor Status Maintain. Main Equipment.

Disconnect the filler tube hose and electrical connection to Automotive fuel pump module assembly. Reconnect the negative battery cable. If there is power and ground at the Automotive electrical fuel pump module assembly, then assembly faulty. If your Automotive electrical fuel pump module assembly is not pumping enough to keep up with the engine, it may need be replaced.

Electric, Fuel Pump Design. The New Design of Module Assembly. To help identify issues of poor electrical connections, a high quality digital volt/ohm/meter should be used to test for voltage drops and continuity. Clogged strainers/filters: The aforementioned contaminants eventually clog critical components including strainers, filters and the Automotive electrical fuel pump module assembly itself.

Note-3: For 2017 Mitsubishi Outlander Sport only fits the SE or SEL model. The three most common causes of Automotive electrical fuel pump module assembly failure include. The most common electrical issues are rusted connectors, loose or melted wiring and connectors. Once located, open the fuel cap and have an assistant turn key to ON position while you listen at filler opening.

Laboratory Ability. Disconnect the negative battery cable. Minimum-Maximum Pressure psi or bar: The Same Pressure As Original. Connect the fuel lines to Automotive electrical pump module assembly.

Three Causes Of Automotive Electrical Fuel Pump Module Assembly Failure. This blockage ultimately impairs the flow of fuel, which may affect vehicle during acceleration, among other long-term impairments. Its function is to supply clean pressurized fuel the injectors. Minimum-Maximum Fuel Level Sender Resistance ohms or : The Same Resistance As Original.

Brand Factory Automotive Distributors, OE/OEM Spec Or Performance/Custom Spec, Part Styles/Designs Factory-Style/Design, OE/OEM-Style/Design, Fitment Type Direct Replacement To The Original One, Placement on Vehicle. What Is Automotive Electrical Fuel Pump Module Assembly. Satisfaction Guaranteed. Fill the tank with gas.

Three Signs Of Automotive Electrical Fuel Pump Module Assembly Failure. Assembly usually incorporate both a fuel inlet and outlet to allow flow from the vehicles engine, in addition an electrical connector that supplies power electric pump. How Is Automotive Electrical Fuel Pump Module Assembly Made. If the fuse is blown, replace it with a of same amperage.

Fuel contamination: is jeopardized from corrosion, debris and moisture, which can all bring visible contaminants into the tank. Lifetime, Condition. A seemingly simple task that can easily be compromised when outside issues affect the performance of Automotive electrical fuel pump module assembly. Injection Molding Machine.

The Automotive electrical fuel pump m odule a ssembly have significantly evolved over the past ten years, this product started as simple replacement for hanger pumps due to its superior low performance and now includes vehicles well many components.A assembly is comprised of an electric which installed inside reservoir keep immersed in even when tank at level.Late model vehicles' assemblies include ROV Roll Over Valves, FLVV Fuel Limit Vent pressure regulator dual strainer / filter designs. If any of these are detected, its recommended to inspect the Automotive electrical fuel pump module assembly check status your vehicle and proactively prevent further issues. Park the vehicle on a firm, level surface and set parking brake. The three major signs of Automotive electrical fuel pump module assembly failure include.

The vehicle isn starting: This is cut and dry, but if the fails to start Automotive electrical fuel pump module assembly may be blame. Item Details. Newly Listed. If the Automotive electrical fuel pump module assembly works, your job is done.

If no sound is made, replacing the Automotive electrical fuel pump module assembly may be necessary.

part #: dyh135828oeoemoriginalpart prices

• $79.99-$212.57

specifications pumpunite:

• for models: Fwd, 4wd, Outlander
• for makes: Mitsubishi
• for years: 2011-2013
• brand: Factory Automotive Distributors
• buyer attention: Hello, Please Use The Tool At The Top Of The Page Enter Year, Make, Model, Trim, Engine Size To Verify Was Approved By, And Must View The Notes Beside The Vehicle You Have Selected, It Is The Buyers Responsibility To Verify.
• manufacturer warranty: Lifetime
• grade type: Premium
• oe/oem spec or performance/custom: Oe/oem Spec
• fitment type: Direct Replacement To The Original One
• placement on vehicle: Inside The Automotive Fuel Tank
• assembly type: Composite, Sealed
• drive type: Electrical
• fuel type: Gasoline
• items included: Mounting Hardware Same As The Picture, Fuel Filter/strainer Mounted Internally
• country/region of manufacture: Taiwan
• item weights: 1.43 Kg / 3.15 Lb
• automotive part styles/designs: Factory-style/design, Oe/oem-style/design
• type: Fuel Pump
• automotive part type: Automotive Electrical Fuel Pump Module Assembly, Automotive Electrical Fuel Pump Assembly, Automotive Electrical Fuel Pump And Sending Unit Module Assembly, Automotive Electrical Fuel Pump And Sender Module Assembly, Automotive Electrical Fuel Pump And Level Unit Module Assembly
• features: Factory-automotive Electrical Fuel Pump Module Assembly, Composite Assembly, Sealed Assembly, Factory-certified, Oe-certified, Oem-certified, Dot-certified, Fmvss-certified, Nhtsa-certified, Epa-certified, Voc-certified, Sae-certified, Astm-certified, Iso-certified, Iatf-certified, Ts-certified, Ul/etl-certified, Fcc-certified, Carb-certified, Cec-certified, Doe-certified, Sgs-certified, Qs9000-certified
• oe/oem part number: E16096, E9016m, Cfg2169, Fg2169, Sp4130m, 1760a353
• automotive electrical fuel pump module assembly components: 2 Electrical Connector Included, Fuel Inlet Port Fuel Outlet Port Included, Plastic Top Cover/flange Included, Abrasion Sleeve Included, Metal Guide Rod Guide Rod Spring Included, Corrugated Pipe Included, Silver Alloy Button Included, Over-molded Armature Included, Carbon Commutator Included, Electric Motor Included, Electrical Turbine Fuel Pump Included, Electrical Turbine Fuel Pump Body Included, Electrical Turbine Fuel Pump Mechanism Included, Plastic Reservoir Assembly Plastic Housing Assembly Included, Rubber Feet Included, Fuel Sending Unit Included, Fuel Float Arm Included, Fuel Tank Pressure Sensor Included, Fuel Pressure Regulator Same As The Picture, Fuel Filter/fuel Strainer Mounted Internally, Metal Clamp Same As The Picture, Gasket/o-seal Ring Same As The Picture, Lock Ring Same As The Picture, Fuel Tank Seal Ring Same As The Picture, Mounting Hardware Wire Harness Same As The Picture
• inlet type quantity: Strainer/filter 1
• outlet quantity shape type: 1 Round Quick Connect
• connector quantity shape type: 2 Trapezoid Rectangle 5pin 3pin
• terminal quantity shape type: 2 Trapezoid Rectangle 5blade 3blade, Other Components Same As The Picture
• automotive electrical fuel pump module assembly working principle: It Mainly Relies On The Electric Motor To Drive The Vane Rotation, And Relies On The Centrifugal Force, The Fuel Will Be Sucked In From The Inlet Hole, And Discharged From The Outlet Hole.
• automotive electrical fuel pump module assembly function: The Fuel Is Pumped Out From The Fuel Tank, And Delivered To The Injector Nozzle Through The Fuel Supply Line, At A Certain Pressure To Provide Quantitative Fuel, For Each Cylinder.
• automotive electrical fuel pump module assembly roles: The Heart Of A Vehicles Fuel Delivery System, To Supply Clean Pressurized Fuel To The Fuel Injector, Provide Fuel Level Reading To The Vehicle Dashboard, Close The Fuel Nozzle When Refueling, Control Supply Of Fuel Through Electrical Signals, Pump Fuel From The Fuel Tank, Feed The Fuel Into The Engine Combustion Chamber, Provide Stable Fuel Flow And Pressure, Ensure Smooth Engine Operation, Increase The Pressure Of Fuel, Ensure Sufficient Fuel Supply To The Engine Combustion Chamber, Send The Pressurized Fuel Into The High-pressure Fuel System, Screen Out Impurities And Pollutants In The Fuel, Prevent Impurities And Pollutants From Entering The Engine, Help Protect Normal Operation Of The Engine, Help Prolong The Service Life Of The Fuel System, Control The Fuel Pressure, Ensure Stable Fuel Supply, Adjust The Fuel Pressure By Responding To Change In Engine Load, Meet The Need In Different Working Condition, Monitor Operation Status Of The Fuel System, Control And Adjust Fuel Supply, Maintain Normal Operation Of The Fuel System
• automotive fuel delivery system components: Fuel Tank, Automotive Electrical Fuel Pump Module Assembly, Fuel Filter, Fuel Lines, Fuel Rail, Fuel Hoses, Fuel Pressure Regulator, Fuel Injectors, Carburetors, Intake Valve, Piston, Combustion Chamber, Fuel Gauge/indicator, Engine, Other Components
• automotive electrical fuel pump module assembly color: Same As The Picture
• automotive electrical fuel pump module assembly certifications: Factory-approved, Oe-approved, Oem-approved, Dot-approved, Fmvss-approved, Nhtsa-approved, Epa-approved, Voc-approved, Sae-approved, Astm-approved, Iso-approved, Iatf-approved, Ts-approved, Ul/etl-approved, Fcc-approved, Carb-approved, Cec-approved, Doe-approved, Sgs-approved, Qs9000-approved
• automotive electrical fuel pump module assembly materials: High-strength Synthetic Metal, High-strength Synthetic Plastic, High-strength Synthetic Rubber
• 7 sign to go for replacement automotive part: No Start, Hard Start, Rough Idle, Hesitation, Lack Of Power, Engine Misfire, Intermittent Engine Performance
• package included: 1xautomotive Electrical Fuel Pump Module Assembly, Automotive Electrical Fuel Pump Assembly, Automotive Electrical Fuel Pump And Sending Unit Module Assembly, Automotive Electrical Fuel Pump And Sender Module Assembly, Automotive Electrical Fuel Pump And Level Unit Module Assembly
• quantity sold: 1 Item Per Lot/1 Piece Per Lot/1 Product Per Lot
• compatible year: 2010, 2011, 2012, 2013 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
• compatible model: Outlander, Outlander Sport
• compatible engine: 2.0l 1998cc 122cu. In. L4 Gas Dohc Naturally Aspirated, 2.4l 2360cc 144cu. In. L4 Gas Dohc Naturally Aspirated
• vehicle service type: Sport Utility 4-door
• voltage: 12 V
• amperage: The Same Amperage As The Original
• minimum-maximum flow rate gph or l/h : The Same Flow Rate As The Original
• minimum-maximum pressure psi or bar : The Same Pressure As The Original
• mounting style: Bolt-on, Screw-in, Screw-on
• universal fitment: Yes
• manufacturer part number: DYH135828OEOEMORIGINALPART

seller pumpunite:

• # reviews: 1969
• city: Ontario, California
• rating: 99.5%

offer pumpunite:

• availability: In Stock
• best offers: True
• options: Ship-to-home
• sold: 0
• started: August 3, 2025

shipping pumpunite:

• class: Economy
• transit: 4-8 Days
• cost: $0.00
• carrier: FedEx
• type: Fixed
• service: FedEx Ground Economy

payments pumpunite:

• other
• wallet: Google-pay
• credit card: Mastercard

general pumpunite:

• condition: New
• Car Truck Parts Accessories > Air Fuel Delivery > Fuel Pumps Sending Units

returns pumpunite:

• paid by: Seller
• time: 30 Days
• policy: Returns Accepted

Factory Automotive Distributors DYH135828OEOEMORIGINALPART Is Similar To:

• Carter M6626 Oem Muscle Car Mechanical Fuel Pump Automotive Replacement (22.1% similar) Money back or exchange guaranteed. Oem carter muscle car mechanical fuel pump Automotive replacement M6626, 1/0 0% genuine us a e l ups next day air may be available for orders over $250 at an extra cost. Please inquire for pricing prior to purchase...(June 3rd, 2024)
• Crown Automotive L4306374 Fuel Filler Hose For Jeep Wrangler 1987-1995 (25.1% similar) Part #: crown Automotive L4306374 for sale...(June 9th, 2024)
• Crown Automotive L4310554 Fuel Cap For Dodge Ram 3500 1997 (26.7% similar) Part #: crown Automotive L4310554 for sale...(June 10th, 2024)
• Herko Automotive Iac1162 Idle Air Control Valve For Isuzu Amigo Rodeo Sport 1998-2003 (37.8% similar) Save up to 30% from retail prices. Manufacture: number: part type: hero Automotive IAC1162 idle air control valve oem 8-92061898-0 valve, standard motor products AC589. 60 day money back guarantee. 1 year replacement warranty. Direct fit application, check...(June 13th, 2024)
• Walbro F90000270 450lph Pump Good Used Fuel Ti Automotive In Tank (17.8% similar) Ti Automotive makes pumps for Alberio part number F90000270 450 in tank fuel pump. Pump is in working order, one small broken piece on the top of inlet, no affect with hose fully. Missing sock and wire harness...(June 26th, 2024)
• Herko Automotive 378ge Fuel Pump Module For Pontiac Toyota Vibe Corolla Matrix 2009-2019 (26.7% similar) Model fuel pump module assembly. Features details. Specification met oe. New fuel pump module assembly in box. Designed with high quality materials to meet or exceed oem specifications. Fit type vehicle specific. Item weight 3.04 pounds. Hero fuel pump module 378GE for Pontiac Toyota...(August 12th, 2024)
• Original Factory Genuine Ti Automotive 16119810569 Right Side In Tank Fuel Pump Actuator Sending Delivery Unit Mini S R60 R61 37k (28.6% similar) Up for sale is an original mini part, it came out of a 2016 cooper countryman, great working condition tested and guaranteed!, what you see get...(August 18th, 2024)
• Bosch Automotive 66843 Direct Injection High Pressure Fuel Pump For Ford Lincoln Flex 10-17 (30.7% similar) This high pressure fuel pump from bosch Automotive is a direct fit for ford and Lincoln flex model's 2010 -2017. The pump is designed for use with gasoline fuel and has an electrical drive type. It is important to check fitment chart for compatibility. It comes with a 1 year replacement warranty...(September 3rd, 2024)
• Herko Automotive 372ge C2-0003 Fuel Pump Module For Saturn Vue Chevrolet Equinox Pontiac Torrent 04-06 (28.3% similar) Fuel pump is new. Blue filter in picture missing. Fuel pump module 372GE for Saturn vie Chevrolet equinox Pontiac torrent 04-06...(November 19th, 2024)
• Bosch Automotive 69593 Electric Fuel Pump For Volvo Jaguar 242 244 245 760 740 745 0580464068 (24.3% similar) System requires in-tank low pressure fuel pump and in-line high pump...(December 10th, 2024)
• Bosch Automotive F00hk01865 Fuel Pump Module For Cadillac Chevrolet Gmc Escalade Ext 08-09 (25.6% similar) 60 day money back guarantee. 1 year replacement warranty. Review photo below for guidance. Manufacture: number: part type: cortex E3753M fuel pump module assembly bosch Automotive 67783 assembly, 69976 carter P76576M Delphi FG1154 GM 530-2950 spectra premium SP6034M 5302950 gm 19168704 19180801...(December 12th, 2024)