1. Used Automotive Fuel Pumps & Sending Units Offers
  2. sku: 5965767480374563
  3. QUALITIPARTS 12405106

QUALITIPARTS 12405106 Electrical Fuel Pump Module Aseembly SP4105M 2.5L 2488CC

fits make: Mazda. year: 2009–2013.

12405106 Qualitiparts For Mazda 6 2009-2013 2.5l 2488cc Electrical Fuel Pump Module Aseembly Sp4105m

( Brand: Qualitiparts ), ( Manufacturer Part Number: 12405106 ), ( Type: Fuel Pump ), ( Fuel Type: Gasoline ), ( Drive Type: Electrical ), ( Placement On Vehicle: Fuel Tank ), ( Oe/oem Part Number: L5181335xb, L5181335xa ), ( Voltage: 12 V ), ( Manufacturer Warranty: 1 Year ), ( Amperage: 10 A ), ( Performance Part: Yes ), ( Universal Fitment: No ), ( Flow Rate: 50 Gph ), ( Fuel Level Sender Resistance: 10-180 Ohm ), ( Ipn: Sp4105m ), ( Pressure: 58-61 Psi ), ( Outlet Outside Diameter: 3/8 )

Review QUALITIPARTS Mazda 2.5l 2488cc Electrical Fuel Pump Module Aseembly fits 2009–2013

The Qualitiparts 12405106 is an electrical fuel pump module assembly specifically designed for Mazda vehicles with a 2.5L 2488cc engine and model years between 2009 and 2013. This fuel pump module is a crucial component of the vehicle's fuel delivery system, responsible for supplying fuel from the gas tank to the engine's injectors.

The assembly consists of various components, including the electrical fuel pump, wiring harness, and related sensors. The fuel pump itself is a high-performance, mechanically fuel-driven centrifugal type, which ensures an efficient and consistent fuel delivery to the engine. This design minimizes the risk of fuel starvation during high engine loads or aggressive driving conditions.

The fuel pump module wiring harness is designed to connect the electrical fuel pump to the vehicle's wiring system. It includes a variety of connectors for easy installation and compatibility with the specific Mazda 2.5L engine. The harness is also shielded to help protect the electrical connections from potential interference and damage.

The fuel pump assembly comes with sensors that monitor the fuel level in the tank, fuel pressure, and temperature. These sensors provide valuable information to the vehicle's engine control unit (ECU) to optimize fuel delivery and improve overall engine performance.

The Qualitiparts 12405106 is a direct fit replacement for the original equipment manufacturer (OEM) fuel pump assembly. It provides the same functionality and performance as the OEM part, making it an excellent choice for Mazda 2.5L owners looking to maintain or restore their vehicle's fuel system. Additionally, the assembly is designed to meet or exceed OEM specifications for durability and reliability.

Installation of the fuel pump module assembly is straightforward and can typically be done by a professional mechanic or an experienced DIY enthusiast. The assembly comes with a clear and concise installation manual, which outlines the necessary steps and provides diagrams for reference.

In summary, the Qualitiparts 12405106 is a high-quality electrical fuel pump module assembly specifically designed for Mazda 2.5L vehicles from 2009 to 2013. It includes a high-performance fuel pump, wiring harness, and sensors, ensuring efficient fuel delivery and improved engine performance. The direct fit design and easy installation process make it a top choice for Mazda owners seeking to maintain or restore their vehicle's fuel system.

The Qualiparts 12405106 is an electrical fuel pump module assembly for Mazda vehicles with the 2.5L 2488cc engine, model years 2009 to 2013. Here are some potential pros and cons of buying this part:

Pros:

1. OEM (Original Equipment Manufacturer) part: This part is manufactured by the same company that originally supplied the part for your Mazda vehicle, ensuring a perfect fit and optimal performance.

2. Improved fuel efficiency: A faulty fuel pump can lead to poor fuel economy. By replacing the faulty fuel pump module assembly, you can improve your vehicle's fuel efficiency.

3. Reliability: An OEM part is designed to meet or exceed the original equipment specifications, providing you with a reliable and long-lasting solution.

4. Peace of mind: Replacing a faulty fuel pump module assembly with a new OEM part can give you peace of mind, knowing that your vehicle's fuel system is functioning correctly.

5. Potential to prevent further damage: A faulty fuel pump can cause other issues in your vehicle, such as engine damage. Replacing the faulty part can prevent further damage and potential expensive repairs in the future.

Cons:

1. Cost: OEM parts can be more expensive compared to aftermarket parts. However, the cost may be worth it for the peace of mind and reliability that comes with an OEM part.

2. Availability: Depending on where you live, it may be challenging to find a local auto parts store that carries this specific part. You may need to order it online or from a dealer.

3. Installation: Installing the fuel pump module assembly can be a complicated process, especially for those without automotive experience. It is recommended that you have a professional mechanic install the part to ensure proper installation.

In conclusion, the Qualiparts 12405106 electrical fuel pump module assembly for Mazda 2009-2013 2.5L 2488cc vehicles is an OEM part that can improve fuel efficiency, provide reliability, and give peace of mind. However, it may be more expensive than aftermarket parts, and installation may require a professional mechanic. Ultimately, the decision to purchase this part depends on your budget, vehicle usage, and personal preference. If you value the reliability and performance of an OEM part, then this part is a worthwhile investment.

Details:

Fuel pump troubleshooting tips. If its too low or high, it could indicate a faulty fuel pump. Replace it if necessary. Install the new fuel pump.

Support the fuel tank with a jack and block of wood. Once located, open the fuel cap and have an assistant turn key to ON position while you listen at filler opening. How to Replace a Fuel Pump, This can be completed in 12 seamless steps; however, it is recommended have an assistant facilitate the process. If there is power and ground at the pump, then pump faulty.

Removing the fuel tank or back seat may be necessary. Remove any retaining straps or bolts holding the tank to frame. A faulty relay can prevent the fuel pump from working. Check Electrical Connections: Ensure that the electrical connections to fuel pump are secure and free from corrosion.

Lower the tank. Look for Leaks: Examine the fuel lines and connections any leaks. Fill the tank with gas. Siphon or drain as much fuel possible from the tank.

Disconnect the negative battery cable. Relieve the fuel system pressure. If no sound is made, replacing the pump may be necessary. Find and verify the fuel pump fuse relay.

If you're experiencing problems with your cars fuel pump, here are some simple troubleshooting tips. Reconnect the filler tube hose and electrical connector. Disconnect the filler tube hose and electrical connection to pump. If you can't hear anything, there may be a problem with the fuel pump.

Connect the fuel lines to pump. Consider replacing it if needed. Check Fuel Pump Relay: Inspect the fuel pump relay in fuse box. Find the fuel pump, which on most vehicles is in tank.

Leaks can affect the fuel pumps performance. If the fuel pump works, your job is done. For Mazda 6 2009 2013 2.5L 2488CC Electrical Fuel Pump Module Aseembly SP4105M Fitment. If the fuse is blown, replace it with a of same amperage.

Reconnect the negative battery cable. Listen for Noise: Turn the key to on position and listen a humming sound near fuel tank. Lift the fuel tank up and install retaining strap. Test Fuel Pressure: Use a gauge to check if the pressure is within recommended range.

Inspect Fuel Pump Fuse: Check the fuel pump fuse for any signs of damage or if its blown. The fuel pump will hum for two to three seconds, if working properly. 30-day free return provided. New List Item.

If the fuse and relay are functional, check for power ground at fuel pump. Disconnect the fuel lines and remove pump from tank. Check fuel pump operation. Park the vehicle on a firm, level surface and set parking brake.

specifications pumpunite:

  • for makes: Mazda
  • for years: 2009-2013
  • brand: Qualitiparts
  • manufacturer part number: 12405106
  • type: Fuel Pump
  • fuel type: Gasoline
  • drive type: Electrical
  • placement on vehicle: Fuel Tank
  • oe/oem part number: L5181335xb, L5181335xa
  • voltage: 12 V
  • manufacturer warranty: 1 Year
  • amperage: 10 A
  • performance part: Yes
  • universal fitment: No
  • flow rate: 50 Gph
  • fuel level sender resistance: 10-180 Ohm
  • interchange part number: SP4105M
  • pressure: 58-61 Psi
  • outlet outside diameter: 3/8

offer pumpunite:

  • best offers: True
  • availability: In Stock
  • sold: 0
  • quantity: 10
  • started: March 20, 2025
  • options: Ship-to-home

shipping pumpunite:

  • service: Standard
  • transit: 4-8 Days
  • type: Fixed
  • class: Standard
  • cost: $0.00

general pumpunite:

  • Car Truck Parts Accessories > Air Fuel Delivery > Fuel Pumps Sending Units
  • condition: New

seller pumpunite:

  • city: Ontario, California
  • rating: 98.8%
  • # reviews: 2650

returns pumpunite:

  • paid by: Seller
  • policy: Returns Accepted
  • time: 30 Days

payments pumpunite:

  • credit card: Diners-club
  • other
  • wallet: Google-pay
for makes: mazda, for years: 2009-2013, type: fuel pump, fuel type: gasoline, drive type: electrical, placement on vehicle: fuel tank, oe/oem part number: l5181335xb, l5181335xa, voltage: 12 v, manufacturer warranty: 1 year, amperage: 10 a, performance part: yes, universal fitment: no, flow rate: 50 gph, fuel level sender resistance: 10-180 ohm, pressure: 58-61 psi, outlet outside diameter: 3/8,
category: auto parts > car truck parts accessories > air fuel delivery > fuel pumps sending units, sku: 5965767480374563,

Qualitiparts 12405106 Is Similar To:

Copyright © pumpunite.com